TOLL FREE 1-800-665-5244 \ LOCAL CALLS 604-461-5444 | Open 7:30am-4:30pm
Back to Category <Previous Item | Next Item>
Click to view large image.

Rebar Caps Flat A-20
Price: $2.28
Part #:  12-0045 
MFG #:  97-1810 
  • Fits rebar #3-7, 3/8" to 7/8" diameter
  • Lightweight and chemical resistant
  • Stands up to weather and temperature conditions
  • Safety orange color provides visibility
  • Dimension: 3.5" W x 3.5" H
  • Standard package 100
BARGARD® caps are not designed or intended to provide impact or impalement protection. They are not a substitute for covering vertical reinforcing steel with timber, as recommended by OSHA, and are not recommended for use when protection from falls is required. For additional information on acceptable methods of guarding against impact or impalement, consult OSHA CFR TITLE 29, PART 19120, ANSI A10.9-1983, and your state regulations for specific requirements.
DISC-10 meets the testing requirements of CAL OSHA Construction Safety Orders Section 1712 on impalement protection from concrete reinforcing bars (#3-9, 3/8 - 1-1/4") for heights up to 7-1/2" and 250 lbs. (CAL OSHA Approval Code #C-1716-AG) when properly installed. Failure to properly install DISC-10 will significantly decrease any impalement protection that may otherwise be provided by the DISC-10 and may result in injury. If positioning fins are missing or damaged, the DISC-10 must be discarded. For information on the requirements of guarding against impalement, consult OSHA CFR Title 29, Sect. 1928.701 et. seq.
Click on the pictures below for a large version.


┬ęBunzel Canada Inc. 2019 | Secured by GeoTrust Catalog Admin